Jumper Connector N3100 LCD

Small but if damaged can cause dizziness, that damage to the LCD connector on the type of Nokia 3100. Damage can be caused by a fall. There are several kinds of damage :

A. Minor damage, which is only just unplugged the connector. Why say minor damage, because only enough to replace with a new one then the problem is over.

B. The damage is quite difficult, loss of leg connection on the LCD connector, so even if we bought new equipment alone will not be able to function LCD. 

To overcome this we need some preparation, including : 

Equipment :

   1. Multitester
   2. Jumper cables
   3. Tin items
   4. Solder
   5. Diagram Book
 
Step improvements :

    * Read the path diagram and find the symbol for the LCD and determine the direction of flow
    * Use multitester to test track
    * Pen do the jumpers at the end of each pin