Function as a Catcher and Transmitters Signal wave received by the Cellular Telephone.
ANTENNA SWITCH
Function as Duplixer / separator between Signal RX (Reception) with Signal TX (transmitting), and can also be referred to as the Terminal on Cellular Telephone.
RX FILTER
Its function as a filter / splitter desired frequency / which will be received, for a cleaner signal to be received by the Cellular Telephone.
REINFORCED RX (Transistor)
Its function as a reception frequency amplifier has been filtered by the RX filter before being processed further by the Cellular Telephone.
RF IC PROCESSOR
Functions For RX signal controller (incoming) and TX (out), so that each part can work properly, this component consists of several sections such as: IF, MIXER, oscillator, detector, encoder, decoder, AFC, TONE FREQUENCY, Squelch
VCO (Voltage Control oscillator)
Functions: As the oscillator / frequency generator that will be sent via the TX (transmission) and check the incoming frequency through the RX (Reception) to stay the same as that in the send out. And also to regulate the voltage pulses of RF Signal Processor.
TX FILTER
Its function as a filter / splitter frequencies to be transmitted or radiated before it was strengthened further by other components contained in the Cellular Telephone.
IC P.A (Power Amplifier)Functions As a signal amplifier that will end in radiated through the antenna switch components contained within the Cellular Telephone
POWER Detector
Is a transistor that detects, weak signal strength and transmit data to the CPU for processing and then provide data throughout the related components, especially with the hardware associated with the Signal
IR T / R Diodes
As the transmitter and the reception frequency data using infrared light, is used to send and receive data software applications, without needing a data cable.
Bluetooth
This component frequency transmitter and receiving data using radio waves or frequencies with the same functions with infra red.
SPEAKER
A tool to discharge the previous sound is just vibrations and converted into electricity via sound with audio IC, which is accepted by the CPU to make a sound contained in the Cellular Telephone.
MICROPHONE
A tool to speak and the way it works is to change the sound vibrations into electrical vibrations for sound received can be processed by other components of Cellular Telephone.
SIM CARD
Identity of each aircraft Cellular Phones current depends on the provider's sim card is used, by the way is processed by the CPU contained in the Cellular Telephone.
C.P.U
Data processing centers located in all elements or components that work in such rule Cellular Telephone related components to work as needed and can receive information from each - each component Example: Ordered to supply IC Power Supply Voltage / flow throughout the Cellular Telephone, ordered the LCD to display the activity on Cellular Telephone, ordered IC Flash to store data and release it when needed, examining data from Sim Card that go through IC Power Supply, received the command data from the keypad to the process.
RAM (RANDOM ACCESS MEMORY)
Store data temporarily and help the performance of a large RAM capacity CPU.semakin better CPU performance.
IC FLASH
A storage area for data on Cellular Telephone, which is temporary because the data can be changed or added.
EEPROM
Place of permanent storage of key data or plant data, and work not with the presence or absence of electric current on the phone, because it has its own electric power. While lying there on the IC AUDIO.
IC REGULATOR
To set the voltage, so that can be set according to the needs of each related components, as well as IC Charging pengkontrol of which is controlled by the CPU.
IC CHARGE
Otomais components that work at the time of charging and it works just to fill battry voltage is controlled by the CPU through the IC Regulators.
IC AUDIO
Functions As an incoming voice signal processing of RF ICs, amplified and transmitted to the Speaker, to strengthen the sound vibrations that have been converted into vibration Mic electricity and then forwarded to RF ICs, run the command from the CPU and the IC Audio also has PCM (Pulse Code Module) and EEPROM which serves to read the coded signal coming from the operator to conform with Imei phone also stores data that is permanent such as: Imei, Phone Code, Sec.Code.
LCD (Liquit Cell Disply)
This component serves as a tool yanga will show all the activities / activities of the Cellular Telephone.
Key Pad
This component serves as a tool that provides command data to the CPU to the process and will be sent to other components involved in the Cellular Telephone.
Interface ICs
Function as a data controller who was ordered by the CPU to Vibrator, Buzzer, light and nature as automatic switches in Cellular Telephone.
Battery
Function as a source of electric current / voltage required to provide electrical current to the Aircraft Cellular Phone.
Flexible
Function as a liaison between one component with other components.
{ 0 comments... Views All / Send Comment! }
Post a Comment