Function Keys Ufs Tornado Box

This section will explain all associated with a menu or button included in the program Ufs tornadoes, why do we need to know first before we start the program, because we are required to have to find out, because due to the occurrence of errors in pressing the button then it is very much fatal
- Connect: To connect the UFS3 Box to a PC (Personal Computer)
- Disconnect: To decide UFS3 Box to a PC (Personal Computer)
- Check: To detect the CPU on the Hp. 1st Boot Ok or No Respond in Hp is alive or dead
- Info: To read information about the Software and Hardware in Mobile who live (to go in Local Mode or Test Mode)
- Flash: To flash the Hp based on MCU and PPM or appropriate data needed for the phone will be flashed, performed on living or dead Hp
- UI Settings: To reset the settings on Hp User Interface based on the choice Options that have been selected UI
- Column? : It is the column mode of operation. Choose? to set to Auto mode Local Mode to flashing mode, Test Mode to mode UI Settings, Normal Mode to turn on Hp (Boot Up)
- Restart: To reset the Hp to the selected mode
- Scenario: It is setting process will be conducted by UFS3 such as:
Flash UI Options for memplash Hp with MCU and PPM
selected, then do UI setting selected Options
- Interface: Type of data selected cable channels, usually automatically like:
M-Bus for Nokia DCT3 and DCTL
F-Bus for Nokia DCT4 and WD2
- Speed: The speed of the process of flashing Hp
- Auto Clr Result Window: Deleting windows automatically if full information
- Auto Scr Result Window: Auto Scrolling a window full of information if
- Autodetect Product: Automatically selects the appropriate product name
detection results info on Hp
- Use This File Settings: Using saved configuration on the computer, better common error is removed if
- Import SimLocks: Opening simlock on Hp based on calculations of data from outside
- PPM Flash Only: To flash the hp only PPM data only (Language Pack), without
Upgrade Version, or the MCU, this process will be faster
- START: To start the Scenario is like a flash and reset
User Interface settings flashed after
- DCT3: To select the firmware or data flash for Nokia DCT3
based on Hp data that will be flashed (CPU DCT3 = MAD)
- DCTL: To select the firmware or data flash for Nokia DCTL
Communicator (CPU DCTL = MADLINDA)
- DCT4: To select the firmware or data flash for Nokia DCT4
Monochrome or Colour Java based (CPU DCT4 = UPP)
- WD2: To select the firmware or data flash for Nokia WD2
based on Symbian OS (WD2 = UPPWD2 CPU)
- Update Firmware: To update the box to a higher version on file
Box updates are available. (Should not be used)
- Reset Countre: To reset the Box Countre (Should not be used)
- Make Pls finish Beep: Beep beep after doing Flash or UI Settings
- Show Tips about product: Displays info about Hp that will be flashed
- Full Info: Learn more about HP that will be flashed
- DCT3 / L Path: Place the firmware or data stored Hp DCT3 and DCTL
(Standartnya are difolder C: \ Wintesla)
- Use Flash Alias: Functions to display the ID of the IC Flash Flash Hp on the screen
result window
- Erase Holes: Serves to erase the data location of the firmware is empty
even before it flashed
- Skip Erase: Serves to flash the Hp without deleting the existing data
- Auto Faid: Serves to update Flash ID after flashed in
automatically to fit the new firmware data
- Enable Flashing: To mark the data which will be flashed is selected as the MCU,
PPM, PMM, etc.
- Save User Settings: Save data such as phone memory flashed before Hp
- UI Defaults: Serves to reset the settings to a standard user Hp
- Full Factory Defaults: Serves to reset to the standard factory setting, this setting will delete the existing data on Hp including Phone lock
- Init SIM Locks: Functioning as an eraser SIM Locks or SIM Rejected
- Set Faid: To update the Flash ID on HP, if after flashed
turned out to No Signal
- Reset User Lock: Serves to reset the security code to be 12 345
- Reboot in Normal Mode: Serves to turn the Hp to Normal Mode
- Update LCD: Serves as setting the LCD by setting the appropriate level
- Rebuild IMEI: Serves to repair damaged IMEI such as Contact
Service or No Signal
- Read Flash: To read the firmware on hp then store in
Computer hard drive is on
- Convert Files: To change data formats or types of existing data
- Erase Flash: Serves to erase the data on Flash IC
- Create THIS Files: To perform the configuration settings according to our will
- Write User Settings: To save data after flashed phone
- Read UEM: Reading UEM IC data including no. IMEI (RPL Files) before
replace the new UEM IC
- Write UEM-SL: Writing UEM IC data including no. IMEI (RPL Files) after
replacing IC UEM, as an improvement when Hp experience
damage such as IMEI ?????????? or SIM Rejected
- Format User Area: Serves to erase the existing memory if it has been damaged, for
system from HP is back to normal, this format works if Hp damaged Application Error, System Error, Contact Retailer, Hang, Low memory, etc.
- Enable BT Flashing: Serves to flash the firmware related with Bluetooth.